The Avaya Partner ACS R7 phone system has just received a feature upgrade. The upgrade is referred to as the “O” release, as is reflected in the release number, which you can verify by pressing FEATURE 59 from any display telephone.

Message Alert Notification

Message Alert Notification allows you to see the message status of extensions on your system other then your own. This is a welcome addition to the Partner ACS R7 feature set. I can’t tell you how often customers have asked if their Partner ACS system could perform this. Message Alert Notification requires you to program an auto dial button for the extension you would like to monitor for messages. The auto dial button will also serves as a means of calling that extension and seeing off-hook status. Once you have the Intercom Auto Dial button programmed, you need to program the Message Alert Notification button. The button when activated will show the message status of all extensions you have programmed on your phone for auto dial, with a red flashing LED.

<-- Programming an Extension Auto Dial button -->
1. Press FEATURE 00 to enter programming
2. Press a button with a light3. Press left INTERCOM button
4. Dial * and extension number
5. Press FEATURE 00 to exit programming 

<-- Programming a Message Alert Notification Button  -->
1. Press FEATURE 00 to enter programming
2. Press a button with a light
3. Press FEATURE 27
4.  FEATURE 00 to exit programming

Network Clock Synchronization

Leave your time change worries behind, the PARTNER ACS R7 will now automatically synchronize your system clock with the time sent from incoming Caller ID information.

Extension Name and Number Display

Displays the programmed extension name and extension number in the upper right of the extensions display.