Features

Free IP Address This camera can be assigned a free, easy to remember IP address such as http://office.viewnetcam.com, which unlike Dynamic IP addresses stays with this camera permanently. There's also no need to install any specialized software as all the required programs are already embedded in the camera. • Motorized Pan & Tilt with 10x Digital Zoom With the simple click of a mouse, a remote Internet user can activate the camera's motorized pan & tilt function to point the lens in a desired direction. The camera can also be assigned 8 preset positions plus a "Home Position" which returns the camera to its original position. A user can also scroll the mouse to digitally magnify an image up to 10x. • SD Card Slot Images can be recorded locally to an optional SD memory card. An SD card serves many functions, including quick retrieval and transfer of event footage, local image archiving and automatic image transfer at an alarm event or when triggered by an external device. A 2GB SD card set to one minute buffer intervals, will record approx. 110,000 images for about 80 days 1 close Please Note: Audio not recorded to SD card • Scheduled Recording with Motion Detection Recording can be continuous or programmed to begin a date and time, when triggered by its internal motion detector or by external sound, light or timer devices. At the event of an alarm, an Email or FTP notification along with images is sent to a designated PC or cell phone over the network. • 2-Way Voice Communication By using an optional speaker in conjunction with this camera's built-in microphone, 2-way voice communication is possible between a person at the camera location and a PC operator over the network. • Multi Camera Viewing A user over the the network can access up to 12 cameras on a single Web browser. Images are viewed by switching between 3 sets of 4 cameras or viewing all 12 cameras on a static screen. Up to 4 cameras can be viewed with full 2-way voice communication for each camera. • PoE (Power over Ethernet) Ready In addition to a standard 12 VDC power input, this camera can be powered solely by its Ethernet cable when used with a PoE feeder. This allows the camera to be installed in an area inaccessible to a power outlet and will also keep the camera running in the event of a power failure.